Mine Seeks to Skip a Weekly Air Check—Is It Safe?
Published Date: 11/17/2026
Notice
Summary
Ramaco Resources wants to change a safety rule for their Tiller No. 1 mine in Virginia. They’re asking to stop weekly air checks at a certain point in the mine’s ventilation system, saying it’s just as safe. If approved, this could save time and money while keeping miners safe. Everyone has until December 17, 2026, to share their thoughts on this change.
Analyzed Economic Effects
3 provisions identified: 2 benefits, 0 costs, 1 mixed.
Required Vent Tube and Fan Specifications
The petitioner proposes a continuous ventilation tube at least 42 inches outside diameter and made of MSHA-approved materials, attached or secured for 1,030 feet of slope, connected to a surface exhausting fan (a 929 RBB centrifugal exhauster at 900 RPM, up to 30 IN/WG). The petitioner anticipates the exhausting fan will move about 60,000 CFM and the main blowing fan will be adjusted to deliver 84,000 CFM (at least 40% more than the exhaust).
Weekly Return-Air Exam Stops at Vent Tube
Ramaco asked MSHA to allow the weekly examination required by 30 CFR 75.364(b)(2) to end when the mine return air enters the exhaust ventilation tubing near the bottom of the slope at Tiller No. 1 Mine (MSHA ID 44-06804). The petition was posted on the mine bulletin board on September 8, 2026, and comments are due December 17, 2026.
Monitoring Ports and Inspection Procedure
Weekly examinations of the exhaust tubing will include exterior inspections along the entire 1,030-foot run plus at least three ports for pitot-tube airflow readings: within 50 feet of the tubing start near the slope bottom, at about the 500-foot midpoint, and within 50 feet of the surface fan. Shift examinations of the slope entry will continue under 30 CFR 75.360.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15670, Roof Control Plan Approval Criteria
In response to a public request, the Mine Safety and Health Administration (MSHA) is reopening the rulemaking record and is scheduling a virtual public hearing on the Agency's proposed rule published on July 1, 2025, titled, "Roof Control Plan Approval Criteria."
2026-15717, Ventilation Plan Approval Criteria
In response to a public request, the Mine Safety and Health Administration (MSHA) is reopening the rulemaking record and is scheduling a virtual public hearing on the Agency's proposed rule published on July 1, 2025, titled, "Ventilation Plan Approval Criteria."
2026-10456, Department of Labor Federal Civil Penalties Inflation Adjustment Act Annual Adjustments for 2026
Good news for businesses and workers: the Department of Labor won’t raise any fines or penalties in 2026 because the usual inflation data wasn’t available. This means all civil penalties stay the same starting May 27, 2026. So, no surprise cost hikes this year—just steady rules and steady fees!
2025-12232, Ventilation Plan Approval Criteria
The Mine Safety and Health Administration (MSHA) wants to change how mine ventilation plans get approved. They’re removing the power of District Managers to add extra rules, making the process clearer and fairer. Mine operators should get ready to comment by July 31, 2025, but no big costs or delays are expected.
2026-23312, Proposed Extension of Information Collection: Proximity Detection Systems for Continuous Mining Machines in Underground Coal Mines
The Mine Safety and Health Administration wants to keep collecting info on safety systems that help prevent accidents with mining machines underground. This affects coal mine operators who use these machines and helps keep miners safe without adding extra paperwork hassle. Comments on this plan are open until January 19, 2027, so speak up if you have thoughts!
2026-23390, Respirable Crystalline Silica and Respiratory Protection
This update fixes a small mistake in the rules about protecting miners from harmful silica dust. It affects underground and surface coal mine operators by clarifying exposure limits to dangerous dust and gases. The correction takes effect November 17, 2026, helping keep miners safer without adding big costs.
Previous / Next Documents
Previous: 2026-23310, Petition for Modification of Application of Existing Mandatory Safety Standards
Crimson Oak Grove Resources, LLC wants to change a safety rule at their Oak Grove Mine in Alabama. They’re asking to use special electronic testing gear closer to certain mining areas than current rules allow, promising it’s just as safe. If approved, this could speed up work without costing extra, but everyone has until December 17, 2026, to share their thoughts.
Next: 2026-23312, Proposed Extension of Information Collection: Proximity Detection Systems for Continuous Mining Machines in Underground Coal Mines
The Mine Safety and Health Administration wants to keep collecting info on safety systems that help prevent accidents with mining machines underground. This affects coal mine operators who use these machines and helps keep miners safe without adding extra paperwork hassle. Comments on this plan are open until January 19, 2027, so speak up if you have thoughts!