Honda Airplane Owners Must Swap Wing Weights for Safety by February
Published Date: 1/13/2026
Rule
Summary
If you own a Honda HA-420 airplane, the FAA has a new rule to keep you safe! You’ll need to swap out the old wing balance weights for new, slimmer ones by February 17, 2026, to fix a tricky gap that could cause trouble. This update helps your plane fly safer without breaking the bank or causing big delays.
Analyzed Economic Effects
3 provisions identified: 2 benefits, 1 costs, 0 mixed.
Must Replace Aileron Balance Weights
If you operate a Honda Model HA-420 with serial numbers 42000172, 42000235–42000265, or 42000267–42000272 and with aileron balance weight part number HJ1-15751-152-003 or HJ1-15751-157-003 installed, you must replace the left and right aileron fixed balance weights with reduced-geometry fixed balance weights before further flight. This AD is effective February 17, 2026 and requires following Honda Service Bulletin No. SB-420-27-011, Revision B, dated December 12, 2024.
Estimated Repair Cost per Airplane
The FAA estimates this AD affects 38 U.S.-registered airplanes. The estimated cost to replace the left and right inboard and outboard fixed balance weights is 45 work-hours × $85/hour = $3,825 labor plus $3,676 parts, for a total estimated cost of $7,501 per airplane and $285,038 to U.S. operators.
Manufacturer May Cover Some Costs
The manufacturer has stated that some of the costs of this AD may be covered under warranty, which could reduce the cost impact on affected operators. The FAA noted this as a possibility but still included full estimated costs in its estimate.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2026-00453 — Safety Zone; Plane Crash Response Between Mile Markers 356 and 362, Gulf Intracoastal Waterway, Galveston, TX
The Coast Guard is setting up a temporary safety zone on the Gulf Intracoastal Waterway near Galveston, TX, between mile markers 356 and 362, to handle a plane crash cleanup. Boats and people can’t enter this area unless they get special permission, keeping everyone safe and protecting the water. This rule starts January 13, 2026, and lasts until January 31, 2026, unless it ends sooner.
Next: 2026-00479 — Atlantic Surfclam and Ocean Quahog Fisheries; 2026 Fishing Quotas for Atlantic Surfclams and Ocean Quahogs; and Suspension of Atlantic Surfclam Minimum Size Limit
Fishermen harvesting Atlantic surfclams and ocean quahogs can keep fishing with the same quotas as last year in 2026. Plus, the minimum size limit for Atlantic surfclams is suspended, meaning smaller clams can be caught this year. These changes keep the seafood supply steady without hurting the ocean, starting January 1 through December 31, 2026.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in