Illinois Administrative Code

Section 218.644 Emissions Testing a) Upon a reasonable request by the Agency, the owner or operator of a polystyrene plant subject to this Subpart shall at his own expense demonstrate compliance by use of the following method: 40 CFR 60, Appendix A, Method 25 - Determination of T…

Section 218.660 Applicability a) Potential to emit: 1) A source is subject to this Subpart if it is not subject to the requirements of Subparts PP, QQ, RR and TT and: A) Not regulated by Subparts B, E, F, H, Q, R, S, T (excluding Section 218.486), V, X, Y, Z or BB of this Subpart…

Section 218.666 Control Requirements a) Every owner or operator of a polyester resin products manufacturing process subject to this Subpart shall comply with the operating requirements below: 1) Any of the following: A) Use polyester resin material with a monomer content as follo…

Section 218.667 Compliance Schedule Every owner or operator of an emission unit subject to the control requirements of this Subpart shall comply with the requirements thereof on and after the date consistent with Section 218.106 of this Part. (Source: Added at 18 Ill. Reg. 1945, …

Section 218.668 Testing a) Testing Methods. 1) The VOM content of fresh cleaning materials shall be determined from supplier data or by sampling and analysis using EPA Reference Method 24, incorporated by reference in Section 218.112 of this Part. 2) The VOM content of waste resi…

Section 218.670 Recordkeeping and Reporting for Exempt Emission Units Upon request by the Agency, the owner or operator of a polyester resin manufacturing process which is exempt from the requirements of Subpart CC of this Part shall submit to the Agency records that document tha…

Section 218.672 Recordkeeping and Reporting for Subject Emission Units a) Any owner or operator of a polyester resin products manufacturing process which is subject to the requirements of this Subpart shall comply with the following: 1) By a date consistent with Section 218.106 o…

Section 218.680 Applicability a) Potential to emit: 1) A source is subject to this Subpart if it is not subject to the requirements of Subparts PP, QQ, RR and TT and has the potential to emit 22.7 Mg (25 tons) or more of VOM per year, in aggregate, from emission units that are: A…

Section 218.686 Control Requirements a) Every owner or operator of an aerosol can filling line that is filling cans with a propellant which contains propane, butane or other VOM subject to this Subpart shall comply with the following requirements: 1) Emission capture and control …

Section 218.688 Testing a) When in the opinion of the Agency it is necessary to conduct testing to demonstrate compliance or verify effectiveness with Section 218.686 of this Part, the owner or operator of a VOM emission unit subject to the requirements of this Subpart shall, at …

Section 218.690 Recordkeeping and Reporting for Exempt Emission Units Upon request by the Agency, the owner or operator of an aerosol can filling line or propellant booster pump which is exempt from the requirements of Subpart DD of this Part shall submit to the Agency records do…

Section 218.692 Recordkeeping and Reporting for Subject Emission Units a) Any owner or operator of an aerosol can filling line or propellant booster pump which is subject to the requirements of Subpart DD of this Part and complying by means of the use of emission capture and cont…

Section 218.720 Applicability (Repealed) (Source: Repealed at 20 Ill. Reg. 14428, effective October 17, 1996)

Section 218.722 Control Requirements (Repealed) (Source: Repealed at 20 Ill. Reg. 14428, effective October 17, 1996)

Section 218.726 Testing (Repealed) (Source: Repealed at 20 Ill. Reg. 14428, effective October 17, 1996)

Section 218.727 Monitoring (Repealed) (Source: Repealed at 20 Ill. Reg. 14428, effective October 17, 1996)

Section 218.728 Recordkeeping and Reporting (Repealed) (Source: Repealed at 20 Ill. Reg. 14428, effective October 17, 1996)

Section 218.729 Compliance Date (Repealed) (Source: Repealed at 20 Ill. Reg. 14428, effective October 17, 1996)

Section 218.730 Certification (Repealed) (Source: Repealed at 20 Ill. Reg. 14428, effective October 17, 1996) SUBPART GG: MARINE TERMINALS

Section 218.760 Applicability a) The requirements of this Subpart shall apply to sources that load or who are permitted to load gasoline or crude oil. b) The requirements of this Subpart shall not apply to the following activities: 1) Loading of liquids associated with the fuelin…

Section 218.762 Control Requirements a) Except as provided at subsection (c) of this Section, every owner or operator of a marine terminal subject to the requirements of this Subpart shall equip each terminal with a vapor collection and control system that: 1) Captures the vapors…

Section 218.764 Compliance Certification By May 1, 1996, or upon initial startup or upon change in method of compliance, the owner or operator of a source subject to the requirements of this Subpart must certify compliance with the requirements of this Subpart by submitting to th…

Section 218.766 Leaks The owner or operator of a marine terminal shall comply with the requirements of Section 218.445 of this Part with respect to all equipment associated with the vapor collection and control system required by Section 218.762(a) of this Subpart. (Source: Added…

Section 218.768 Testing and Monitoring a) Compliance with Section 218.762(a)(2) of this Subpart shall be determined by visual inspection and by the leak detection methods contained in Section 218.105(g) of this Part. b) If the control device used to comply with Section 218.762(a)…

Section 218.770 Recordkeeping and Reporting a) The owner or operator of sources complying with Sections 219.762(a) and (b), or (c)(1), or (c)(3) of this Subpart shall maintain records regarding the marine terminal, and each time a marine vessel is loaded during the regulatory con…

Section 218.780 Emission Limitations a) Except as provided in Section 218.782 of this Subpart, no owner or operator of a motor vehicle refinishing operation shall coat motor vehicles, mobile equipment, or their parts and components, unless all coatings, except touch-up coatings, …

Section 218.782 Alternative Control Requirements As an alternative to complying with the VOM content limitations in Section 218.780 of this Subpart, the owner or operator of a motor vehicle refinishing operation may operate control equipment that reduces VOM emissions at the sour…

Section 218.784 Equipment Specifications Every owner or operator of a motor vehicle refinishing operation, unless the source uses less than 20 gallons of coating per calendar year from all motor vehicle refinishing operations combined, shall: a) Coat motor vehicles, mobile equipm…

Section 218.786 Surface Preparation Materials Every owner or operator of a motor vehicle refinishing operation only shall use surface preparation materials that never exceed the following VOM content limitations for the specified substrate: kg/l (lb/gal) a) Plastic parts 0.78 (6.…

Section 218.787 Work Practices a) Every owner or operator of a motor vehicle refinishing operation shall ensure that fresh and spent solvent, cloth or paper used to apply solvents for surface preparation or cleanup, waste paint, and sludge are stored in closed containers. b) Ever…

Section 218.788 Testing a) Upon request by the Agency, the owner or operator of a motor vehicle refinishing operation shall, at its own expense, conduct tests to demonstrate compliance with Sections 218.780, 218.782 or 218.786 of this Subpart, in accordance with the applicable te…

Section 218.789 Monitoring and Recordkeeping for Control Devices a) Every owner or operator of a motor vehicle refinishing operation that complies with this Subpart pursuant to Section 218.782 of this Subpart shall: 1) Install and operate equipment to continuously monitor each co…

Section 218.790 General Recordkeeping and Reporting (Repealed) (Source: Repealed at 30 Ill. Reg. 9684, effective May 15, 2006)

Section 218.791 Compliance Date Every owner or operator of a motor vehicle refinishing operation shall comply with the requirements of this Subpart by March 15, 1996, upon modification or upon initial startup. (Source: Added at 19 Ill. Reg. 6848, effective May 9, 1995)

Section 218.792 Registration (Repealed) (Source: Repealed at 37 Ill. Reg. 1669, effective January 28, 2013)

Section 218.875 Applicability of Subpart BB (Renumbered) (Source: Renumbered to Section 218.640 at 17 Ill. Reg. 16636, effective September 27, 1993)

Section 218.877 Emissions Limitation at Polystyrene Plants (Renumbered) (Source: Renumbered to Section 218.642 at 17 Ill. Reg. 16636, effective September 27, 1993)

Section 218.879 Compliance Date (Repealed) (Source: Repealed at 17 Ill. Reg. 16636, effective September 27, 1993)

Section 218.881 Compliance Plan (Repealed) (Source: Repealed at 17 Ill. Reg. 16636, effective September 27, 1993)

Section 218.883 Special Requirements for Compliance Plan (Repealed) (Source: Repealed at 17 Ill. Reg. 16636, effective September 27, 1993)

Section 218.886 Emissions Testing (Renumbered) (Source: Renumbered to Section 218.644 at 17 Ill. Reg. 16636, effective September 27, 1993) SUBPART II: FIBERGLASS BOAT MANUFACTURING MATERIALS

Section 218.890 Applicability a) Except as provided in subsection (b) of this Section, on and after May 1, 2012, the requirements of this Subpart shall apply to the owners or operators of sources that manufacture hulls or decks of boats from fiberglass, or that build molds to mak…

Section 218.891 Emission Limitations and Control Requirements a) Except as provided in subsection (f) of this Section, no owner or operator of a source subject to the requirements of this Subpart shall use a subject resin or gel coat at the source unless the resin and gel coat co…

Section 218.892 Testing and Monitoring Requirements a) Testing to demonstrate compliance with the requirements of Section 218.891 of this Subpart shall be conducted by the owner or operator by May 1, 2012. Thereafter, testing shall be conducted within 90 days after a request by t…

Section 218.894 Recordkeeping and Reporting Requirements a) The owner or operator of a source exempt from the limitations of this Subpart because of the criteria in Section 218.890(a) of this Subpart shall: 1) By May 1, 2012, or upon initial start-up, whichever is later, submit a…

Section 218.900 Applicability a) Except as provided in subsection (b) of this Section, on and after May 1, 2012, the requirements of this Subpart shall apply to miscellaneous industrial adhesive application operations at sources where the total actual VOM emissions from all such …

Section 218.901 Emission Limitations and Control Requirements a) The owner or operator of a source subject to the requirements of this Subpart shall comply with the limitations in subsection (b), (c), or (d) of this Section, as well as with the limitations in subsections (e) and …