Michigan Administrative Code

R 408.17129 Hydraulic safety. Rule 7129. A hydraulic system of piping, hose and their component parts shall have a designed safety factor of 4. Page 5 Courtesy of www.michigan.gov/orr History: 1979 AC.

R 408.17130 Fire safety. Rule 7130. (1) Fabrics which contain a combustible vapor or fluid first shall be rinsed in cold water or maintained not less than 25 feet from spark producing equipment or open flame. (2) Smoking shall be prohibited except in designated areas. "NO SMOKING…

R 408.17131 Material handling. Rule 7131. (1) A mechanism used to tilt tote boxes shall be enclosed by a standard barrier on 3 sides. (2) Where a chain or cable sling or metal bale is used in connection with lifting by a powered hoist, the hook of the hoist shall be equipped with…

R 338.17131 Definitions. Rule 131. As used in this part: (a) “Appropriate pharmacology training” means 8 hours of training related to pharmacology applicable to midwifery practice, approved by the MEAC or the board. (b) “Consultation” means the process by which a licensed midwife…

R 338.17132 Informed disclosure and consent. Rule 132. (1) At the inception of care for a patient, a licensed midwife shall provide an informed disclosure in writing to the patient that includes all the following: (a) A description of the licensed midwife's training, philosophy o…

R 338.17133 Additional informed consent requirements. Rule 133. (1) Additional informed consent processes are required when a patient presents to a licensed midwife under any of the following circumstances: (a) Previous cesarean birth - at the inception of care. (b) Fetus in a br…

R 338.17134 Consultation and referral. Rule 134. (1) A licensed midwife shall consult with or refer a patient to a physician, physician's assistant, or advanced practice registered nurse licensed under article 15 of the code, MCL 333.16101 to 333.18838, document the consultation …

R 338.17135 Emergent transfer of care. Rule 135. (1) In the following emergent circumstances, a licensed midwife shall immediately arrange for transport of the patient to a hospital and notify hospital staff of the transfer of care of the patient: (a) Mother: (i) Seizures. (ii) U…

R 338.17136 Prohibited conduct. Rule 136. An individual covered by these rules shall not perform the following acts: Page 15 Courtesy of Michigan Administrative Rules (a) Except as provided in R 338.17137, administer prescription drugs or medications. (b) Use vacuum extractors or…

R 338.17137 Administration of prescription drugs or medications. Rule 137. (1) Pursuant to section 17111 of the code, MCL 333.17111, a licensed midwife who has appropriate pharmacology training and holds a standing prescription from an appropriate health professional with prescri…

R 338.17138 Report patient's data. Rule 138. (1) A licensed midwife shall report patient data to the statistics registry maintained by the MANA's DOR, or its successor organization, pursuant to the MANA's policies and procedures, or a similar registry maintained by a successor or…

R 338.17139 Telehealth. Rule 139. (1) A licensed midwife shall obtain consent for treatment before providing a telehealth service under section 16284 of the code, MCL 333.16284. (2) A licensed midwife shall keep proof of consent for telehealth treatment in the patient's up-to- da…

R 338.17141 License renewals; requirements; applicability. Rule 141. (1) In addition to meeting the requirements of section 16201 of the code, MCL 333.16201, an applicant for renewal shall submit a completed application on a form provided by the department, together with the requ…

R 408.17141 Marking machine and label remover. Rule 7141. A marking machine or label remover with an opening of more than 1/4 inch shall be guarded by 1 of the following: (a) A spring compression device designed to prevent injury if the fingers are caught between the marking plun…

R 408.17142 Washing machines. Rule 7142. (1) The outer door of a double cylinder washing machine shall be interlocked to prevent the inside cylinder from moving when the outer door is open and also to prevent opening the outer door when the inside cylinder is in motion. The use o…

R 408.17143 Extractors. Rule 7143. (1) A rotating extractor shall be equipped with a metal cover interlocked in a manner so as to prevent opening it when the basket is in motion or to prevent power operation of the basket when the cover is open. (2) A rotating extractor shall not…

R 408.17144 Combination washer-extractor. Rule 7144. A combination washer-extractor shall be: (a) Equipped with a braking device. (b) Equipped with a steel door interlocked to the drive mechanism which will prevent opening the door while the cylinder is in motion and prevent oper…

R 408.17145 Power wringer. Rule 7145. (1) A power wringer shall be equipped with a safety bar or barrier positioned in front of and across the entire front of the first feed or pressure roll so arranged that if the bar or barrier is struck, either the machine will stop or the pre…

R 408.17146 Starching machine. Rule 7146. A starching machine shall be guarded by an enclosure or barrier to prevent contact with the moving cylinder or box. History: 1979 AC. R 408.17147 Rescinded. History: 1979 AC; 1981 AACS; 1983 AACS.

R 408.17148 Tumblers; shake out, conditioning, and drying. Rule 7148. (1) A tumbler shall be equipped with a safety interlock that will prevent energizing the drive motor unless the door is closed. The interlock shall allow for momentary inching the tumbler cylinder to facilitate…

R 408.17149 Steam drying box and cabinets. Rule 7149. A steam drying box or cabinet having access doors shall be equipped with both inside and outside latches. History: 1979 AC.

R 408.17150 Dampening machine. Rule 7150. A roll dampening machine shall be guarded in a manner which will enclose the rolls and prevent an employee's fingers from entering the pinch point. History: 1979 AC.

R 408.17151 Beaters. Rule 7151. A beater on a flat work ironer other than 1 using cloth or canvas beater blades, shall be guarded against accidental contact by the operator. History: 1979 AC.

R 408.17152 Folding machine. Rule 7152. (1) A fixed or interlocked removable barrier shall cover the moving parts of a flatwork folding machine. (2) A small piece folding machine shall have access openings covered and interlocked to the power source, where an employee would be ex…

R 408.17153 Rollers and unrollers. Rule 7153. (1) A towel roller shall be equipped with a barrier made of plastic or expanded metal electrically interlocked to the power source or interlocked to the clutch and designed to prevent entry into the pinch point created by the 2 inrunn…

R 408.17154 Ironers. Rule 7154. (1) A flatwork ironer shall be equipped with a safety bar or barrier positioned in front of and across the entire front of the first feed or pressure rolls so arranged that striking of the bar or barrier will stop the machine. The stopping distance…

R 408.17155 Laundry press. Rule 7155. (1) A laundry press shall be equipped with a control device requiring concurrent use of both hands until the press has closed and the locking device has taken effect. (2) A laundry press shall be provided with an emergency release bar or butt…

R 408.17156 Vertical pants presser. Rule 7156. A vertical pants presser with a fly clamp, except those manually actuated, shall be equipped with a 2-hand control device for the fly clamp and an interlocked door covering the point of operation. History: 1979 AC.

R 408.17157 Vertical coverall or shirt press. Rule 7157. A vertical coverall or shirt press having shoulder or yoke clamps shall be equipped with a 2-hand control device. History: 1979 AC.

R 408.17158 Sewing machines. Rule 7158. A sewing machine shall be equipped with a permanently attached guard which will prevent a finger from passing between the needle and the pressure foot. The guard design shall allow threading of the needle without removing the guard. Page 10…

R 408.17159 Hot patch machine. Rule 7159. A hot patch machine shall be equipped with a barrier to enclose the point of operation or it shall be equipped with a 2-hand control device. History: 1979 AC.

R 408.17160 Tying machine. Rule 7160. A tying machine shall be equipped with an enclosure guard around the path of the moving arm so designed as to eliminate any pinching between the table and the guard or the guard and the arm. History: 1979 AC. SPECIAL FOR DRY CLEANING

R 408.17161 Cover or door interlocks. Rule 7161. (1) An extractor, washer or tumbler used in a dry cleaning operation shall have the covers or doors interlocked to prevent the inside cylinder from moving when the cover or door is open. On an extractor, the interlock shall also pr…

R 408.17162 Extractors. Rule 7162. An extractor shall not be operated in excess of its rated speed. If the rated speed is unavailable, table 1 of R 408.17143 shall be followed. History: 1979 AC.

R 408.17163 Dry cleaning press. Rule 7163. (1) A dry cleaning press may be actuated by use of 1 hand, but when pressure is increased or a locking device is actuated, 2-hand controls shall be used concurrently. (2) A dry cleaning press shall be provided with an emergency release b…

R 408.17201 Scope. Rule 7201. This part sets forth rules for the safe maintenance and operation of equipment in, around, and about places of employment where vehicles or tire and wheel assemblies are serviced, repaired, and salvaged. Manufacturing, research, and development facil…

R 339.17201 Educational requirements. Rule 201. An applicant for licensure shall provide proof, as directed by the department, verifying 1 of the following to satisfy the educational requirements under the code: (a) Transcripts verifying that the applicant received a baccalaureat…

R 325.17203 Construction details for plans and specifications; modifications. Rule 203. (1) Plans and specifications for a new dry cleaning establishment or modification of an existing dry cleaning establishment that are submitted to the department for approval shall include, at …

R 325.17204 Review of plans and specifications by department. Rule 204. (1) Upon receipt of the transmittal letter, plans, and specifications, license or certificate application, appropriate fee, and proof of local approval, the department shall review the documents as soon as pr…

R 408.17204 Definitions; A to E. Rule 7204. (1) "Automotive lift" means a vehicle lifting device, the purpose of which is to raise an entire vehicle to provide accessibility for convenient under chassis service. (2) "Class I flammable liquid" means those having a flash point belo…

R 408.17206 Definitions; P to S. Rule 7206. (1) "Pinch point" means a point at which it is possible to be caught between the moving parts of a machine, between moving and stationary parts of a machine, or between a moving object and a stationary object. (2) "Restraining device" m…

R 408.17207 Definitions; V to Y. Rule 7207. (1) "Vehicle" means a powered conveyance operating on 2 or more wheels, including, but not limited to, an automobile, truck or trailer. (2) "Wet operations" means those operations which involve the drainage, splash or running of liquids…

R 325.17207 Approvals and authorizations; terms and conditions. Rule 207. An approval and authorization issued under R 325.17205 shall require that the project be constructed in accordance with the approved plans and specifications. The department may attach additional conditions…

R 325.17210 Inspection of dry cleaning establishment. Rule 210. (1) When the construction of a new dry cleaning establishment is completed, the owner, operator, or designated agent shall notify the department and arrange for an inspection of the establishment. The owner, operator…

R 408.17211 Employer responsibility. Rule 7211. An employer shall do all of the following: (a) Provide training to an employee as to the hazards, safe operations of the assigned job, and applicable rules of this part. (b) Assure that job required tools, equipment, and the work ar…

R 408.17212 Employee responsibility. Rule 7212. An employee shall do all of the following: (a) Use tools and equipment only when authorized and trained in their use. (b) Report employers' defective tools and equipment and hazardous conditions, when detected, to the supervisor. (c…

R 408.17213 Personal protective equipment. Rule 7213. (1) An employer shall provide and an employee shall wear eye protection in accordance with and as prescribed in the General Industry Safety Standards Part 33. Personal Protective Equipment, R 408.13301 to R 408.13398 of the Mi…