Michigan Administrative Code

R 408.10152 Blotters. Rule 152. A blotter shall be used between a flange and the abrasive wheel. The blotter shall cover the entire contact area of the flange.Exceptions: (a) Mounted, cone, and plug wheels. (b) Abrasive discs--inserted nut, inserted washer, and projecting stud ty…

R 408.10153 Multiple wheel mounting. Rule 153. When mounting more than 1 abrasive wheel between a pair of flanges, the wheels shall be cemented together, separated by spacers having low compressibility such as soft copper or brass or especially manufactured for mounting without c…

R 400.10153 Resident work experience. Rule 153. Work experiences for a resident shall be appropriate for the age, health, and abilities of the resident. History: 1992 AACS.

R 408.10154 Mounting nuts. Rule 154. (1) A single spindle nut shall be tightened only enough to drive the abrasive wheel and prevent slippage. (2) A multiple screw flange shall be tightened uniformly to distribute pressure over the flange surface and prevent springing of the flan…

R 400.10155 Recreational activities. Rule 155. (1) Written policy and procedure shall provide a recreation and leisure time plan that includes at least 1 hour per day of large muscle activity and 1 hour of leisure time activities. Page 11 Courtesy of Michigan Administrative Rules…

R 408.10156 Mounting depressed center wheels. Rule 156. (1) A depressed center wheel, except as prescribed in rule 157, shall be mounted with specially designed adaptors. (2) The back flange shall extend beyond the central hub or raised portion and contact the wheel to counteract…

R 408.10157 Mounting depressed center cutting-off wheels. Rule 157. A depressed center cutting-off wheel more than 16 inches in diameter shall be mounted with flat unrelieved flanges having matching bearing surfaces not less than 1/4 the wheel diameter. History: 1979 AC.

R 400.10157 Health services; policies and procedures. Rule 157. (1) A facility shall establish and follow written health service policies and procedures that address all of the following: (a) Routine and emergency medical and dental care. (b) Health screening procedures. (c) Main…

R 408.10158 Mounting cylinder wheels. Rule 158. (1) A cylinder wheel shall be cemented or chucked onto a machine face plate which shall be flat, concentric, and mounted at 90 degrees to the machine spindle. (2) A cylinder wheel shall be used only on a machine equipped with a band…

R 400.10159 Reporting hospitalization or death of resident. Rule 159. (1) Any serious injury or illness that requires the hospitalization of a resident shall be reported to the parent and responsible referring agency as soon as possible, but not more than 24 hours after hospitali…

R 408.10159 Mounting segments. Rule 159. (1) Segments shall be chucked in a holding mechanism as prescribed by the manufacturer of the chucking device. (2) The segments shall be used only on a machine equipped with a band-type guard as prescribed in R 408.10129. History: 1979 AC.…

R 400.10161 Clothing. Rule 161. Each resident shall have sufficient, clean, properly fitting, seasonally appropriate clothing. History: 1992 AACS. R 400.10163 Personal hygiene. Page 12 Courtesy of Michigan Administrative Rules Rule 163. A facility shall arrange for each resident …

R 400.10165 Resident nutrition. Rule 165. (1) A facility shall provide a minimum of 3 nutritious meals daily, unless medically contraindicated and documented. (2) Special diets shall be prescribed only by a physician. A resident who has been prescribed a special diet by a physici…

R 400.10167 Emergency procedures; firearms. Rule 167. (1) A facility shall have written procedures to be followed in emergency situations, including all of the following situations: (a) Fire. (b) Tornado. (c) Medical emergency. (d) A missing person. (e) The taking of a hostage. (…

R 400.10169 Discipline. Rule 169. (1) A facility shall have and follow written policy and procedure which stipulates that residents shall not be subjected to any of the following: (a) Corporal or cruel punishment. (b) Humiliation. Page 13 Courtesy of Michigan Administrative Rules…

R 400.10171 Resident confinement room; approved usage. Rule 171. A facility approved to use a resident confinement room may place a resident in this room for the following reasons: (a) For sleep during normal sleeping hours. (b) For medical reasons. (c) For privacy, when a reside…

R 400.10173 Resident confinement room; construction. Rule 173. (1) A room used for resident confinement shall be approved in writing for use as such by the fire inspection authority and the licensing authority. (2) A resident confinement room shall be constructed and equipped so …

R 408.10174 Grinding machine spindle speeds. Rule 174. (1) The spindle speed shall be permanently marked on a grinding machine and maintained in a legible manner. (2) The spindle speed shall not exceed the rated speed of the grinding wheel. (3) The wheel spindle speed on a single…

R 400.10175 Resident confinement room; procedures for use. Rule 175. (1) A facility that uses a resident confinement room shall establish and follow written policies and procedures specifying its use. (2) The policy shall include the approved reasons for use as specified in R 400…

R 408.10175 Wheel speeds. Rule 175. (1) An abrasive wheel or its package shall show the maximum operating speed as revolutions per minute. The use of a package for this marking shall be limited to those shapes which make marking unfeasible. (2) Except as provided for in R 408.101…

R 400.10176 Resident confinement room; disciplinary usage. Rule 176. (1) A resident confinement room may be used for disciplinary reasons, but only as specified in written policy and procedure. Page 15 Courtesy of Michigan Administrative Rules (2) Before confinement to a resident…

R 400.10177 Resident restraint; pregnant youth. Rule 177. (1) The facility shall establish and follow written policy and procedures specifying the use of resident restraint. (2) The written policy must limit the uses of resident restraint to the following: (a) As a precaution aga…

R 408.10177 Special speeds. Rule 177. (1) Wheels that are used on special applications at speeds higher than those listed in table 21 of R 408.10199 shall be marked for high-speed application and the specific conditions of use. The marked maximum speed of the wheel shall not be e…

R 400.10179 Inspection and approval of facility. Rule 179. A facility, including new construction, additions, and conversions, shall be occupied by residents only after inspection and approval by the department. History: 1992 AACS.

R 408.10181 Operating provisions. Rule 181. (1) A grinding machine with a vari-speed control shall have the speed adjustment supervised by an authorized and trained employee. (2) Before mounting a wheel on a vari-speed grinder, an employee shall adjust the speed of a machine to n…

R 400.10181 Facility construction; plans and specifications. Rule 181. (1) Plans and specifications shall be submitted to the licensing authority for review and approval before any remodeling in a facility or the construction or conversion of a structure for use as a facility. (2…

R 408.10182 Training. Rule 182. An employee shall be instructed in the care, use, and protection of an abrasive wheel and equipment before assignment. History: 1979 AC.

R 408.10183 Wheel breakage. Rule 183. (1) A cracked or broken wheel shall not be used. (2) Wheel breakage shall be investigated by the employer to determine and correct the cause. History: 1979 AC.

R 400.10183 Sleeping rooms and resident confinement rooms; minimum requirements. Rule 183. (1) All resident sleeping rooms and resident confinement rooms shall have a bed above floor level. (2) If not a part of the sleeping room, all of the following shall be made available to re…

R 408.10184 Starting new wheels. Rule 184. After mounting an abrasive wheel, it shall be run with the guard in place or in an enclosure at operating speed for not less than 1 minute before applying work. During this time an employee shall not stand in front of or in line with the…

R 400.10185 Facility proximity to adult corrections facility. Rule 185. If the facility is on the grounds of or is attached to an adult corrections facility, it shall be in a separate, self-contained unit. History: 1992 AACS.

R 408.10185 Truing and dressing wheels. Rule 185. An out-of-truth abrasive wheel shall be trued by a trained employee. A wheel which cannot be trued shall not be used. History: 1979 AC.

R 408.10186 Side, form, shoulder, and contour grinding. Rule 186. Side grinding shall only be performed on an abrasive wheel that is designed for that purpose. A wheel designed for grinding on the periphery shall not be used for side grinding. This does not preclude wheel use for…

R 408.10187 Maintenance. Rule 187. (1) An employer shall maintain grinding equipment in a condition which will not create a hazard for the employee. Page 22 Courtesy of www.michigan.gov/orr (2) An employer shall instruct the employee to report defective equipment to the employee'…

R 400.10187 Housing population; rated capacity. Rule 187. The population in housing or living units shall not exceed the rated capacity. History: 1992 AACS.

R 400.10189 Bedding and linen. Rule 189. (1) Each resident shall be provided with an individual bed with a clean mattress and sufficient clean blankets. Polyurethane mattresses are prohibited. (2) Each resident shall be provided with clean bedding at least weekly and more often i…

R 408.10198 Figures. Rule 198. Figures 1 to 23 read as follows: FIGURES 1 TO 23 FIGURE 1 FIGURE 2 FIGURE 3 TYPICAL DRAWN STEEL GUARD FOR WHEELS 8 inches Diameter and Smaller a, b & c Page 23 Courtesy of www.michigan.gov/orr FIGURE 4 DRAWN STEEL GUARD FOR PORTABLE GRINDERS USED WI…

R 408.10199 Tables. Rule 199. Tables 1 to 31 read as follows: TABLES 1 TO 31 TABLE 1 GUARD EXPOSURE ANGLE Grinder Type Exposure Above or Below Horizontal Plane Total Exposure Bench and Floor 65 degrees above *90 degrees Cylindrical Grinder 65 degrees above 180 degrees Surface Gri…

R 400.10199 Rescission. Rule 199. R 400.71 to R 400.74 of the Michigan Administrative Code, appearing on pages 2991 and 2992 of the 1979 Michigan Administrative Code, are rescinded. History: 1992 AACS. PART 2. DETENTION AND SHELTER CARE FACILITIES

R 338.10199 Rescission. Rule 199. R 338.1201 of the Michigan Administrative Code, appearing on page 2479 of the 1979 Michigan Administrative Code, is rescinded. History: 1989 AACS. PART 2. LICENSURE R 338.10201 Rescinded. History: 1990 AACS; 1994 AACS; 2003 AACS; 2017 AACS.

R 325.10201 Public hearings; applicable law. Rule 201. Public hearings conducted by the division pursuant to the act and these rules shall be in accordance with, and subject to, Act No. 306 of the Public Acts of 1969, as amended, being §§24.201 to 24.315 of the Michigan Compiled …

R 400.10201 Applicability. Rule 201. This part and part 1 apply to all detention and shelter facilities unless specifically noted otherwise. Page 18 Courtesy of Michigan Administrative Rules History: 1992 AACS.

R 408.10201 Scope. Rule 201. This standard applies to all general industry workplaces. This standard covers all walking-working surfaces unless specifically excluded by an individual section of this standard. History: 1979 AC; 1989 AACS; 2018 AACS.

R 792.10201 Scope. Rule 201. (1) These rules govern practice and procedure in all contested cases and proceedings before the tribunal. These rules are known as and may be referred to as the “tax tribunal rules” and may be cited as “TTR.” (2) The rules in part 2 of these rules gov…

R 408.10202 Adoption of federal standard. Rule 202. (1) The federal Occupational Safety and Health Administration (OSHA) regulation 29 C.F.R. 1910 Subpart D “Walking-Working Surfaces,” as amended November 18, 2016, is adopted by reference in these rules. (2) The regulation 29 C.F…

R 338.10202 Examination; adoption; passing scores. Rule 202. The board approves and adopts the examinations developed by the NCSBN, identified as the "NCLEX-RN" for the registered nurse and the "NCLEX-PN" for the practical nurse. Examinees shall achieve a passing score on the NCL…

R 418.10202 Evaluation and management services. Rule 202. (1) The evaluation and management procedure codes from "Current Procedural Terminology, CPT®", as adopted by reference in R 418.10107, shall be used on the bill to describe office visits, hospital visits, and consultations…