Ohio Administrative Code

(A) Wastes from wood preserving processes at plants that do not resume or initiate use of chlorophenolic preservatives will not meet the listing description of F032 once the generator has met all of the requirements of paragraphs (B) and (C) of this rule. These wastes may, howeve…

Used, broken cathode ray tubes (CRTs) are not wastes if the CRTs meet the following conditions:(A) Prior to processing. These materials are not wastes if the materials are destined for recycling and if the materials meet the following requirements:(1) Storage. The broken CRTs sha…

Used, intact cathode ray tubes (CRTs) exported for recycling are not wastes if such CRTs meet the notice and consent conditions of 40 CFR 261.39(a)(5), and if such CRTs are not "accumulated speculatively" as defined in paragraph (C)(8) of rule 3745-51-01 of the Administrative Cod…

The requirements of rules 3745-51-400 to 3745-51-420 of the Administrative Code apply to those areas of an entity managing hazardous secondary materials excluded under paragraphs (A)(23) and (A)(24) of rule 3745-51-04 of the Administrative Code where such materials are generated …

Any person wanting to export used, intact cathode ray tubes (CRTs) to a foreign country shall comply with 40 CFR 261.41.(A) CRT exporters who export used, intact CRTs for reuse shall send a notification to U.S. EPA. This notification may cover export activities extending over a t…

(A) Maintenance and operation of facility. Facilities generating or accumulating hazardous secondary material shall be maintained and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or non-sudden release of hazardous secondary materials or hazar…

A generator or an intermediate or reclamation facility that generates or accumulates six thousand kilograms or less of hazardous secondary material shall comply with the following requirements:(A) At all times there shall be at least one employee either on the premises or on call…

A generator or an intermediate or reclamation facility that generates or accumulates more than six thousand kilograms (kg) of hazardous secondary material, or a facility receiving refrigerant from off-site under rules 3745-266-600 to 3745-266-602 of the Administrative Code, that …

Rules 3745-51-730 to 3745-51-735 of the Administrative Code apply to process vents associated with distillation, fractionation, thin-film evaporation, solvent extraction, or air or steam stripping operations that manage hazardous secondary materials excluded under the remanufactu…

As used in rules 3745-51-730 to 3745-51-735 of the Administrative Code, all terms not defined herein have the meanings given in the Resource Conservation and Recovery Act and Chapters 3745-50 to 3745-57, 3745-65 to 3745-69, 3745-205, 3745-256, and 3745-266 of the Administrative C…

(A) The remanufacturer or other person who stores or treats hazardous secondary materials in hazardous secondary material management units with process vents associated with distillation, fractionation, thin-film evaporation, solvent extraction, or air or steam stripping operatio…

(A) (1) The remanufacturer or other person who stores or treats the hazardous secondary materials in hazardous secondary material management units using closed-vent systems and control devices used to comply with Chapter 3745-51 of the Administrative Code shall comply with this r…

(A) Each remanufacturer or other person who stores or treats the hazardous secondary material subject to rules 3745-51-730 to 3745-51-735 of the Administrative Code shall comply with the test methods and procedural requirements provided in this rule.(B) When a closed-vent system …

(A) (1) Each remanufacturer or other person who stores or treats the hazardous secondary material subject to rules 3745-51-730 to 3745-51-735 of the Administrative Code shall comply with the recordkeeping requirements of this rule.(2) A remanufacturer or other person who stores o…

(A) Applicability. Rules 3745-51-750 to 3745-51-764 of the Administrative Code apply to equipment that contains hazardous secondary materials excluded under the remanufacturing exclusion in paragraph (A)(27) of rule 3745-51-04 of the Administrative Code, unless the equipment oper…

(A) (1) Each pump in light liquid service shall be monitored monthly to detect leaks by the methods specified in paragraph (B) of rule 3745-51-763 of the Administrative Code except as provided in paragraphs (D), (E), and (F) of this rule.(2) Each pump in light liquid service shal…

(A) Each compressor shall be equipped with a seal system that includes a barrier fluid system and that prevents leakage of total organic emissions to the atmosphere, except as provided in paragraphs (H) and (I) of this rule.(B) Each compressor seal system as required in paragraph…

(A) Except during pressure releases, each pressure relief device in gas or vapor service shall be operated with no detectable emissions, as indicated by an instrument reading of less than five hundred parts per million (ppm) above background, as measured by the method specified i…

(A) Each sampling connection system shall be equipped with a closed-purge, closed-loop, or closed-vent system. This system shall collect the sample purge for return to the process or for routing to the appropriate treatment system. Gases displaced during filling of the sample con…

(A) (1) Each open-ended valve or line shall be equipped with a cap, blind flange, plug, or a second valve.(2) The cap, blind flange, plug, or second valve shall seal the open end at all times except during operations requiring hazardous secondary material stream flow through the …

(A) Each valve in gas or vapor or light liquid service shall be monitored monthly to detect leaks by the methods specified in paragraph (B) of rule 3745-51-763 of the Administrative Code and shall comply with paragraphs (B) to (E) of this rule, except as provided in paragraphs (F…

(A) Pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors shall be monitored within five days by the method specified in paragraph (B) of rule 3745-51-763 of the Administrative Code if evidence …

(A) Delay of repair of equipment for which leaks have been detected will be allowed if the repair is technically infeasible without a hazardous secondary material management unit shutdown. In such a case, repair of this equipment shall occur before the end of the next hazardous s…

(A) The remanufacturer or other person who stores or treats the hazardous secondary material in a hazardous secondary material management units using closed-vent systems and control devices subject to rules 3745-51-750 to 3745-51-764 of the Administrative Code shall comply with r…

(A) A remanufacturer or other person who stores or treats the hazardous secondary material subject to the requirements of rule 3745-51-757 of the Administrative Code may elect to have all valves within a hazardous secondary material management unit comply with an alternative stan…

(A) A remanufacturer or other person who stores or treats the hazardous secondary material subject to the requirements of rule 3745-51-757 of the Administrative Code may elect for all valves within a hazardous secondary material management unit to comply with one of the alternati…

(A) Each remanufacturer or other person who stores or treats the hazardous secondary material subject to rules 3745-51-750 to 3745-51-764 of the Administrative Code shall comply with the test methods and procedures requirements provided in this rule.(B) Leak detection monitoring,…

(A) (1) Each remanufacturer or other person who stores or treats the hazardous secondary material subject to rules 3745-51-750 to 3745-51-764 of the Administrative Code shall comply with the recordkeeping requirements of this rule.(2) A remanufacturer or other person who stores o…

(A) Rules 3745-51-780 to 3745-51-789 of the Administrative Code apply to tanks and containers that contain hazardous secondary materials excluded under the remanufacturing exclusion in paragraph (A)(27) of rule 3745-51-04 of the Administrative Code, unless the tanks and container…

As used in rules 3745-51-780 to 3745-51-789 of the Administrative Code, all terms not defined herein have the meaning given in the Resource Conservation and Recovery Act and Chapters 3745-50 to 3745-57, 3745-65 to 3745-69, 3745-205, 3745-256, and 3745-266 of the Administrative Co…

(A) This rule applies to the management of hazardous secondary material in tanks and containers subject to rules 3745-51-780 to 3745-51-789 of the Administrative Code.(B) The remanufacturer or other person who stores or treats the hazardous secondary material shall control air po…

(A) Material determination procedure to determine average volatile organic (VO) concentration of a hazardous secondary material at the point of material origination.(1) Determining average VO concentration at the point of material origination. A remanufacturer or other person who…

(A) This rule applies to the control of air pollutant emissions from tanks for which paragraph (B) of rule 3745-51-782 of the Administrative Code references the use of this rule for such air emission control.(B) The remanufacturer or other person who stores or treats the hazardou…

(A) Applicability. This rule applies to the control of air pollutant emissions from containers for which paragraph (B) of rule 3745-51-782 of the Administrative Code references the use of this rule for such air emission control.(B) General requirements.(1) The remanufacturer or o…

(A) This rule applies to each closed-vent system and control device installed and operated by the remanufacturer or other person who stores or treats the hazardous secondary material to control air emissions in accordance with standards of rules 3745-51-780 to 3745-51-789 of the …

(A) The remanufacturer or other person who stores or treats the hazardous secondary material shall inspect and monitor air emission control equipment used to comply with rules 3745-51-780 to 3745-51-789 of the Administrative Code in accordance with the applicable requirements spe…

(A) Each remanufacturer or other person who stores or treats the hazardous secondary material subject to requirements of rules 3745-51-780 to 3745-51-789 of the Administrative Code shall record and maintain the information specified in paragraphs (B) to (J) of this rule, as appli…

(A) The rules in this multi-program chapter shall apply when referenced in either of the following:(1) A rule in a program chapter.(2) A rule in another multi-program chapter that was made applicable by a rule in a program chapter.Program chapters are Chapters 3745-520 to 3745-59…

If a term used in this chapter is defined in rule 3745-500-02 of the Administrative Code, that definition used in rule 3745-500-02 of the Administrative Code is applicable to this chapter unless the term is defined in this rule. As used in this chapter:(A) Reserved.(B) Reserved.(…

[Comment: For dates of non-regulatory government publications, publications of recognized organizations and associations, test methods, federal rules, and federal statutory provisions referenced in this rule, see rule 3745-500-03 of the Administrative Code titled "Incorporation b…

(A) The owner or operator shall construct engineered components in compliance with the authorizing document and with the requirements in this chapter. Except as provided in rule 3745-512-50 of the Administrative Code, an engineered component cannot be altered without obtaining pr…

(A) Conveyence pipes shall meet the following criteria:(1) For pressurized pipes, be composed of high density polyethylene (HDPE), unless an alternative material is approved in accordance with rule 3745-512-17 of the Administrative Code.(2) Be resistant to crushing and deformatio…

(A) The owner or operator shall visually inspect each tank to identify any leak, repair each leak found, and test the repair. Testing using air pressure shall be at twice the hydrostatic pressure at the bottom of the tank when the tank is full.(B) Certification of each tank by th…

(A) For each engineered component at the facility, the owner or operator shall demonstrate the following through a construction certification report:(1) Compliance with the facility design in the authorizing document.(2) The engineered component was installed in a manner that did…

(A) Upon providing written notice of deficiency, the concurring authority may decline to act on the construction certification, including the alterations contained therein, of an engineered component until the construction certification report is complete.(B) The concurring autho…

(A) Upon detection by the owner or operator or upon notification by the concurring authority that a failed test or an alteration which was not previously concurred with by the concurring authority has occurred in any engineered component or portion of a facility, the owner or ope…

(A) Immediately upon discovery of a damaged or failed engineered component and in accordance with applicable federal, state, and local statutes and rules, the owner or operator shall do the following:(1) Notify the following:(a) If a spill needs to be reported in accordance with …