Wisconsin Administrative Code

NR 257.13 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve t…

NR 257.14 New source performance standards. Any new source subject to this subchapter shall achieve the following performance standards: Table 15 Core with an annealing furnace scrubber NSPS Pollutant or pollutant property Maximum for Maximum for any 1 day monthly average mg/off-…

NR 257.15 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for existing…

NR 257.20 Applicability; description of the rolling with emulsions subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from core and ancillary rolling with emulsions operations. History: Cr. Regi…

NR 257.21 Specialized definitions. In addition to the definitions set forth in s. NR 257.03, the following definitions apply to the terms used in this subchapter: (1) XAncillary operationY means any operation which is not a core operation but which is performed on-site following …

NR 257.22 Effluent limitations representing the degree of effluent reduction attainable by application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve…

NR 257.23 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve t…

NR 257.25 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for existing…

NR 257.26 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for new sources: Table 60 Core ope…

NR 257.30 Applicability; description of the extrusion subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from core and ancillary extrusion operations. History: Cr. Register, November, 1989, No. …

NR 257.32 Effluent limitations representing the degree of effluent reduction attainable by application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve…

NR 257.33 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve t…

NR 257.35 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for existing…

NR 257.36 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for new sources. Degassing operati…

NR 257.40 Applicability; description of the forging subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from core and ancillary forging operations. History: Cr. Register, November, 1989, No. 407,…

NR 257.41 Specialized definitions. In addition to the definitions set forth in s. NR 257.03, the following definitions apply to the terms used in this subchapter: (1) XAncillary operationY means any operation which is not a core operation but which is performed on-site following …

NR 257.44 New source performance standards. Any new source subject to this subchapter shall achieve the following performance standards: Table 107 Core operation NSPS Pollutant or pollutant property Maximum for Maximum for any 1 day monthly average mg/off-kg (lb/million off-lbs) …

NR 257.45 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for existing…

NR 257.50 Applicability; description of the drawing with neat oils subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from core and ancillary drawing with neat oils operations. History: Cr. Regi…

NR 257.51 Specialized definitions. In addition to the definitions set forth in s. NR 257.03, the following definitions apply to the terms used in this subchapter: (1) XAncillary operationY means any operation which is not a core operation but which is performed on-site following …

NR 257.52 Effluent limitations representing the degree of effluent reduction attainable by application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve…

NR 257.53 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve t…

NR 257.54 New source performance standards. Any new source subject to this subchapter shall achieve the following performance standards: Table 139 Core operation NSPS Pollutant or pollutant property Maximum for Maximum for any 1 day monthly average mg/off-kg (lb/million off-lbs) …

NR 257.55 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for existing…

NR 257.60 Applicability; description of the drawing with emulsions or soaps subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from core and ancillary drawing with emulsions or soaps operations.…

NR 257.61 Specialized definitions. In addition to the definitions set forth in s. NR 257.03, the following definitions apply to the terms used in this subchapter: (1) XAncillary operationY means any operation which is not a core operation but which is performed on-site following …

NR 257.62 Effluent limitations representing the degree of effluent reduction attainable by application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve…

NR 257.63 Effluent limitations representing the degree of effluent reduction attainable by the application of best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the f…

NR 257.64 New source performance standards. Any new source subject to this subchapter shall achieve the following performance standards: NR 257.64 Table 174 Core operation NSPS Pollutant or pollutant property Maximum for Maximum for any 1 day monthly average mg/off-kg (lb/million…

NR 257.65 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for existing…

NR 257.66 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for new sources: Table 188 Core op…

NR 258.01 Purpose. The purpose of this chapter is to establish effluent limitations, standards of performance, and pretreatment standards for discharges from the meat products category of point sources and subcategories thereof. Note: The authority for promulgation of this chapte…

NR 258.02 Applicability. The effluent limitations, standards of performance, and pretreatment standards in this chapter are applicable to pollutants or pollutant properties in discharges resulting from operations of facilities in any of the following subcategories as defined in s…

NR 258.03 Definitions. The following definitions are applicable to terms used in this chapter. Definitions of other terms and meanings of abbreviations are set forth in ch. NR 205. (1) XSlaughterhouseY means a plant that slaughters animals and has as its main product fresh meat a…

NR 258.04 Compliance with effluent limitations and standards. Discharge of pollutants from facilities subject to the provisions of this chapter may not exceed, as appropriate: (1) By July 1, 1977 effluent limitations representing the degree of effluent reduction attainable by the…

NR 258.06 Application of effluent limitations and standards. (1) The effluent limitations and standards set forth in this chapter shall be used in accordance with this section to establish the quantity or quality of pollutants or pollutant properties which may be discharged by a …

NR 258.10 Effluent limitations, best practicable treatment. The following effluent limitations when applied in accordance with s. NR 258.06 establish the quantity or quality of pollutants or pollutant properties which may be discharged by a facility subject to the provisions of t…

NR 258.11 Effluent limitations, best available treatment. The following effluent limitations when applied in accordance with s. NR 258.06 establish the quantity or quality of pollutants or pollutant properties which may be discharged by a facility subject to the provisions of thi…

NR 258.12 Standards of performance. The following effluent limitations when applied in accordance with s. NR 258.06 establish the quantity or quality of pollutants or pollutant properties which may be discharged by a new source subject to the provisions of this chapter. (1) The p…

NR 258.13 Pretreatment standards. The pretreatment standards for discharges to publicly owned treatment works from sources subject to the provisions of this chapter shall be as set forth in ch. NR 211. History: Cr. Register, June, 1976, No. 246, eff. 7-1-76; r. and recr. Register…

NR 26.01 Fish refuges. The following areas are created and established as fish refuges and it shall be unlawful for any COUNTY (3) Barron WATERS (a) Beaver Dam lake inlets REFUGE BOUNDARIES Cumberland ditch (unnamed, SW ƒ of the NE ƒ, section 5, T35N, R13W) upstream to Riebe lake…

NR 26.02 Lake Superior Fish refuges. In order to prevent substantial depletion of the fish supply, the following spawning areas and nursery areas in Lake Superior are created and established as fish refuges and no person may take, catch, capture, kill, or fish for fish in any man…

NR 26.03 Establishment of temporary fish refuges. (1) CRITERIA. Pursuant to sub. (2), the department may establish a temporary fish refuge on a water or part of a water when it finds through scientific investigation, fish population monitoring, or documentation of fish movement t…

NR 260.01 Purpose. The purpose of this chapter is to establish pretreatment standards and effluent limitations for existing sources in the electroplating industry which introduce pollutants into publicly owned treatment works. History: Cr. Register, October, 1986, No. 370, eff. 1…

NR 260.02 Applicability. (1) The provisions of this chapter are applicable to existing sources which discharge pollutants into publicly owned treatment works resulting from operations in the following process subcategories as defined in s. NR 260.03 (3): (a) Electroplating of com…

NR 260.03 Definitions. The following definitions are applicable to terms used in this chapter. Definitions of other terms and meanings of abbreviations are set forth in chs. NR 205 and 211, and the Development Document for Existing Source Pretreatment Standards for the Electropla…

NR 260.10 Applicability. All facilities which generate wastewater from any of the processes listed in s. NR 260.02 (1) discharging directly to waters of the state are subject to the provisions of ch. NR 261. History: Cr. Register, October, 1986, No. 370, eff. 11-1-86. Subchapter …

NR 260.20 Applicability. All indirect discharges of wastewater generated from any of the processes listed in s. NR 260.02 (1) except those subject to pretreatment standards for new sources included under ch. NR 261, are subject to the provisions of this subchapter. All captive fa…

NR 260.21 Compliance dates. Industrial users subject to the provisions of this subchapter shall meet the following compliance dates: (1) By April 27, 1984, for all facilities which are not integrated facilities and are subject to pretreatment standards for existing sources. (2) B…

NR 260.22 Discharge standards. (1) Any existing source which introduces pollutants into a publicly owned treatment works shall comply with ch. NR 211 and achieve the following pretreatment standards for existing sources (PSES). The subcategories referred to in Tables 1 through 4 …