Wisconsin Administrative Code

NR 262.33 New source performance standards. Any new source subject to this subcategory shall achieve the following new source performance standards: NSPS Maximum for any 1 day Pollutant or pollutant property Chromium Lead Nickel Zinc Aluminum Iron Oil and grease TSS pH Chromium L…

NR 262.34 Pretreatment standards for existing sources. (1) Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subcategory which introduces pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403 and achieve the following …

NR 262.35 Pretreatment standards for new sources. Except as provided in 40 CFR 403.7, any new source subject to this subcategory which introduces pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403 and achieve the following pretreatment standards fo…

NR 262.40 Applicability; description of the copper basis material subcategory. This subcategory applies to discharges to waters of the state and introductions of pollutants into publicly owned treatment works from porcelain enameling of copper basis materials. History: Cr. Regist…

NR 262.43 New source performance standards. Any new source subject to this subcategory shall achieve the following new source performance standards: NSPS Maximum for monthly Maximum for any 1 day average Pollutant or pollutant property Chromium Lead Nickel Zinc Aluminum Iron Oil …

NR 262.45 Pretreatment standards for new sources. Any new source subject to this subcategory which introduces pollutants into a publicly owned treatment works shall Metal Coating Metal Coating preparation operation preparation operation 2 Metric units-mg/m of area processed or co…

NR 262.50 Cross-references. The federal citations in this chapter correspond to provisions of the Wisconsin Administrative Code and Wisconsin Statutes. The federal citations may be cross-referenced in the following table: CODE OF FEDERAL REGULATIONS CORRESPONDING STATE CODE SECTI…

NR 263.01 Purpose. The purpose of this chapter is to establish effluent limitations, standards of performance and pretreatment standards for discharges of process wastes from the coil coating category of point sources and its subcategories. History: Cr. Register, April, 1989, No.…

NR 263.015 Applicability. This chapter applies to any coil coating facility or to any canmaking facility that discharges or may discharge pollutants to waters of the state or into a publicly owned treatment works. History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.

NR 263.02 General definitions. The following definitions are applicable to terms used in this chapter. Definitions of other terms and the meanings of other abbreviations are set forth in ss. NR 205.03, 205.04 and 211.03. (1) XAluminum basis materialY means aluminum, aluminum allo…

NR 263.03 Monitoring and reporting requirements. The following special monitoring and reporting requirements apply to all facilities regulated by this chapter: (1) CYANIDE. Periodic analyses for cyanide are not required when both of the following conditions are met: (a) The first…

NR 263.04 Compliance dates. (1) Any existing source subject to this chapter which discharges to waters of the state shall achieve: (a) The effluent limitations representing BPT by July 1, 1977; and (b) The effluent limitations representing BAT by July 1, 1984. (2) Any new source …

NR 263.10 Applicability; description of the steel basis material subcategory. This chapter applies to discharges to waters of the state and introductions of pollutants into publicly owned treatment works from coil coating of steel basis material coils. History: Cr. Register, Apri…

NR 263.11 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ach…

NR 263.12 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve t…

NR 263.13 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS: STEEL BASIS MATERIAL SUBCATEGORY NSPS Maximum for any 1 Maximum for day monthly average Pollutant or mg/m2 (pounds per 1 million ft2) of pollutant property area…

NR 263.14 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a publicly owned treatment works shall comply with ch. NR 211 and may not exceed the following pr…

NR 263.15 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a publicly owned treatment works shall comply with ch. NR 211 and may not exceed the following pretreatment standards f…

NR 263.20 Applicability; description of the galvanized basis material subcategory. This subchapter applies to discharges to waters of the state and introductions of pollutants into publicly owned treatment works from coil coating of galvanized basis material coils. History: Cr. R…

NR 263.21 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ach…

NR 263.22 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve t…

NR 263.23 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS: GALVANIZED BASIS MATERIAL SUBCATEGORY NSPS Effluent Limitations Maximum for any 1 Maximum for day monthly average Pollutant or mg/m2 (pounds per 1 million ft2) …

NR 263.24 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a publicly owned treatment works shall comply with ch. NR 211 and may not exceed the following pr…

NR 263.25 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a publicly owned treatment works shall comply with ch. NR 211 and may not exceed the following pretreatment standards f…

NR 263.30 Applicability; description of the aluminum basis material subcategory. This subchapter applies to discharges to waters of the state and introductions of pollutants into publicly owned treatment works from coil coating of aluminum basis material coils. History: Cr. Regis…

NR 263.31 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ach…

NR 263.32 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve t…

NR 263.33 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS: ALUMINUM BASIS MATERIAL SUBCATEGORY NSPS Maximum for any 1 Maximum for day monthly average Pollutant or mg/m2 (pounds per 1 million ft2) of area pollutant prope…

NR 263.34 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a publicly owned treatment works shall comply with ch. NR 211 and may not exceed the following pr…

NR 263.35 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a publicly owned treatment works shall comply with ch. NR 211 and may not exceed the following pretreatment standards f…

NR 263.40 Applicability; description of the canmaking subcategory. This subchapter applies to discharges to waters of the state and introductions of pollutants into publicly owned treatment works from canmaking processes. History: Cr. Register, April, 1989, No. 400, eff. 5-1-89. …

NR 263.41 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ach…

NR 263.42 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve t…

NR 263.43 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS: CANMAKING SUBCATEGORY NSPS Effluent Limitations Maximum for any 1 Maximum for day monthly average Pollutant or g (lbs)/1,000,000 cans manufactured pollutant pro…

NR 263.44 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a publicly owned treatment works shall comply with ch. NR 211 and may not exceed the following pr…

NR 263.45 Pretreatment standards for new sources. Except as provided [in] s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a publicly owned treatment works shall comply with ch. NR 211 and may not exceed the following pretreatment standards…

NR 264.01 Purpose. The purpose of this chapter is to establish effluent limitations, performance standards, and pretreatment standards for discharges of process wastes from the electrical and electronic components category of point sources and its subcategories. History: Cr. Regi…

NR 264.02 Applicability. This chapter applies to any manufacturing operation which produces semiconductors, electronic crystals, cathode ray tubes, or luminescent materials and which discharges or may discharge process wastewater pollutants to waters of the state or into a public…

NR 264.03 General definitions. The following definitions are applicable to the terms used in this chapter. Definitions of other terms and abbreviations are set forth in ss. NR 205.03, 205.04 and 211.03. (1) XExisting sourceY means any point source, except a new source as defined …

NR 264.04 Alternative to monitoring for total toxic organics. (1) Instead of monitoring for TTO, the certification set forth in sub. (3) may be used as a comment within the discharge monitoring report required by s. NR 205.07 (3) (d) or 211.15 (4), if the following 4 conditions a…

NR 264.05 Compliance dates. (1) The following compliance dates apply to any source subject to this chapter which discharges to waters of the state: (a) Any existing source shall achieve the effluent limitations representing BPT by July 1, 1977. (b) Except as provided in par. (c),…

NR 264.10 Applicability; description of the semiconductor subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from all process operations, beginning with the use of crystal wafers, which lead to …

NR 264.11 Specialized definitions. The following definitions apply to the terms used in this subchapter: (1) XSemiconductorY means a solid state electrical device which performs functions such as information processing and display, power handling, and interconversion between ligh…

NR 264.12 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ach…

NR 264.13 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve t…

NR 264.14 New source performance standards. Any new source subject to this subchapter shall achieve the following NSPS: Table 3 Semiconductor NSPS Pollutant or pollutant property TTO Fluoride pH Average of daily Maximum for any values for 30 con1 day secutive days milligrams per …

NR 264.15 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and the TTO concentration in the discharge may not exceed 1.3…