Wisconsin Administrative Code

NR 279.43 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). (1) Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcateg…

NR 279.44 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). (1) Any existing point source subject to this subcategory shall achieve the following effluent limita…

NR 279.45 Pretreatment standards for existing sources (PSES). Except as provided in 40 CFR 403.7 and 403.13 any existing source subject to this subcategory which introduces pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403 and achieve the followin…

NR 279.46 Standards of performance for new sources (NSPS). (1) Any new source subject to this subcategory shall achieve the following new source performance standards (NSPS): NSPS effluent limitations Pollutant or pollutant Maximum for any Average of daily values property 1 day f…

NR 279.47 Pretreatment standards for new sources (PSNS). Except as provided in 40 CFR 403.7, any new source subject to this subcategory which introduces pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403 and achieve the following pretreatment stand…

NR 279.50 Applicability; description of the integrated subcategory. The provisions of this subcategory are applicable to all discharges resulting from any facility that produces petroleum products by the use of topping, cracking, lube oil manufacturing processes, and petrochemica…

NR 279.52 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). (1) Except as provided in 40 CFR 125.30-125.32 any existing point source subject to this sub…

NR 279.53 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). (1) Except as provided in 40 CFR 125.30 - 125.32, any existing point source subject to this subcat…

NR 279.54 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). (1) Any existing point source subject to this subcategory shall achieve the following effluent limita…

NR 279.55 Pretreatment standards for existing sources (PSES). Except as provided in 40 CFR 403.7 and 403.13 any existing source subject to this subcategory which introduces pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403 and achieve the followin…

NR 279.56 Standards of performance for new sources (NSPS). (1) Any new source subject to this subcategory shall achieve the following new source performance standards (NSPS): NSPS effluent limitations Maximum for any Average of daily values 1 day for 30 consecutive days Metric un…

NR 279.57 Pretreatment standards for new sources (PSNS). Except as provided in 40 CFR 403.7 any existing [new] source subject to this subcategory which introduces pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403 and achieve the following pretreat…

NR 279.60 Cross-reference. The federal citations in this chapter correspond to provisions of the Wisconsin administrative code and Wisconsin statutes. The federal citations may be cross-referenced in the following table: CODE OF FEDERAL REGULATIONS CORRESPONDING STATE CODE SECTIO…

NR 28.01 Definitions. As used in this chapter and in s. 29.611, Stats.: (1) XCarry-over rootsY are those wild ginseng roots still in the possession of licensed dealers or harvesters after March 31 of the year following the harvest season. (2) XDealerY means any person buying more…

NR 28.02 Scope and applicability. This chapter contains rules necessary to implement s. 29.611, Stats., and operate in conjunction with that statute to govern the harvest, transportation, possession, processing or sale of certain wild plants. History: Emerg. cr. eff. 7-1-80; cr. …

NR 28.03 Ginseng licenses. (1) ISSUANCE. (a) Department action. The department shall issue wild ginseng harvest licenses and wild ginseng dealer[s licenses in accordance with the provisions of and for the purposes authorized in s. 29.611, Stats. (b) Applications. 1. ZContent.[ Wi…

NR 280.01 Purpose. The purpose of this chapter is to establish effluent limitations, standards of performance, and pretreatment standards for discharges of process wastes from the synthetic resin manufacturing category of point sources and subcategories thereof. Note: The authori…

NR 280.02 Applicability. The effluent limitations, standards of performance, pretreatment standards and other provisions in this chapter are applicable to pollutants or pollutant properties in discharges of process waste resulting from the manufacture and associated processing of…

NR 280.03 Definitions. Definitions of terms and meanings of abbreviations are set forth in ch. NR 205. History: Cr. Register, June, 1976, No. 246, eff. 7-1-76.

NR 280.04 Compliance with effluent limitations and standards. Discharge of pollutants from facilities subject to the provisions of this chapter may not exceed, as appropriate: (1) By July 1, 1977 effluent limitations representing the degree of effluent reduction attainable by the…

NR 280.06 Application of effluent limitations and standards. (1) The effluent limitations and standards set forth in this chapter shall be used in accordance with this section to establish the quantity or quality of pollutants or pollutant properties which may be discharged by a …

NR 280.10 Effluent limitations, best practicable treatment. The following effluent limitations for all or specific subcategories establish, except as provided in subch. IV of ch. 2 NR 220, the quantity or quality of pollutants or pollutant properties which may be discharged by a …

NR 280.11 Effluent limitations, best available treatment. The following effluent limitations for all or specific subcategories establish the quantity or quality of pollutants or pollutant properties which may be discharged by a facility subject to the provisions of this chapter a…

NR 280.12 Standards of performance. The following effluent limitations for all or specific subcategories when applied in accordance with s. NR 280.06 establish the quantity or quality of pollutants or pollutant properties which may be discharged by a facility which is a new sourc…

NR 280.13 Pretreatment standards. The pretreatment standards for discharges to publicly owned treatment works from sources subject to the provisions of this chapter shall be as set forth in ch. NR 211. History: Cr. Register, June, 1976, No. 246, eff. 7-1-76; r. and recr. Register…

NR 281.01 Purpose. The purpose of this chapter is to establish effluent limitations, standards of performance, and pretreatment standards for discharges of process wastes from the paint and ink formulation category of point sources and subcategories thereof. Note: The authority f…

NR 281.02 Applicability. The effluent limitations, standards of performance, pretreatment standards, and other provisions in this chapter are applicable to pollutants or pollutant properties in discharges of process waste resulting from manufacture of the following subcategories:…

NR 281.03 Definitions. Definitions of terms and meanings of abbreviations used in this chapter are set forth in ch. NR 205. History: Cr. Register, June, 1977, No. 258, eff. 7-1-77.

NR 281.04 Compliance with effluent limitations and standards. Discharge of pollutants from facilities subject to the provisions of this chapter may not exceed, as appropriate: (1) By July 1, 1977 effluent limitations representing the degree of effluent reduction attainable by the…

NR 281.06 Application of effluent limitations and standards. (1) The effluent limitations and standards set forth in this chapter shall be used in accordance with this section to establish the quantity or quality of pollutants or pollutant properties which may be discharged by a …

NR 281.10 Effluent limitations, best practicable treatment. There shall be no discharge of process wastewater pollutants except as provided in subch. IV of ch. NR 220, from a facility subject to the provisions of this chapter after application to process wastes of the best practi…

NR 281.11 Effluent limitations, best available treatment. There shall be no discharge of process wastewater pollutants from a facility subject to the provisions of this chapter after application to process wastes of the best available technology economically achievable. History: …

NR 281.12 Standards of performance. There shall be no discharge of process wastewater pollutants from a facility which is a new source subject to the provisions of this chapter. History: Cr. Register, June, 1977, No. 258, eff. 7-1-77.

NR 281.13 Pretreatment standards. The pretreatment standards for discharges to publicly owned treatment works from sources subject to the provisions of this chapter shall be as set forth in ch. NR 211. History: Cr. Register, June, 1977, No. 258, eff. 7-1-77; r. and recr. Register…

NR 283.01 Purpose. The purpose of this chapter is to establish effluent limitations and standards of performance for discharges of process wastes from the plastics molding and forming category of point sources and its subcategories. History: Cr. Register, October, 1987, No. 382, …

NR 283.015 Applicability. NR 283.02 General definitions. NR 283.03 Monitoring and reporting requirements. Subchapter II - Contact Cooling and Heating Water Subcategory NR 283.10 Applicability; description of the contact cooling and heating water subcategory. NR 283.11 Effluent li…

NR 283.02 General definitions. In addition to the definitions set forth in ch. NR 205 and s. NR 211.03, the following definitions apply to this chapter: (1) XAverage process water usage flow rateY means the volume of process water used per year by a plastics molding and forming p…

NR 283.03 Monitoring and reporting requirements. Compliance with the maximum monthly average effluent limitations and pretreatment standards listed in the tables for each regulated process is required regardless of the number of samples analyzed and averaged. The maximum monthly …

NR 283.10 Applicability; description of the contact cooling and heating water subcategory. This subchapter applies to the discharge of pollutants from processes in the contact cooling and heating water subcategory to waters of the state and the introduction of pollutants into POT…

NR 283.11 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. (1) Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall…

NR 283.12 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Based on EPA[s determination that BPT provides adequate control of toxic pollutants in contact cooling and heating …

NR 283.13 New source performance standards. (1) Any new source subject to this subchapter shall achieve performance standards which are calculated by multiplying the average process water usage flow rate for the contact cooling and heating water processes at a new source times th…

NR 283.14 Pretreatment standards for existing sources. Any existing source subject to this subchapter that introduces pollutants into a POTW shall comply with ch. NR 211. Note: PSES for bis(2-ethylhexyl) phthalate are reserved. History: Cr. Register, October, 1987, No. 382, eff. …

NR 283.15 Pretreatment standards for new sources. Any new source subject to this subchapter that introduces pollutants into a POTW shall comply with ch. NR 211. Note: PSNS for bis(2-ethylhexyl) phthalate are reserved. History: Cr. Register, October, 1987, No. 382, eff. 11-1-87.

NR 283.16 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. (1) Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve …

NR 283.20 Applicability; description of the cleaning water subcategory. This subchapter applies to the discharge of pollutants from processes in the cleaning water subcategory to waters of the state and the introduction of pollutants into POTWs. The cleaning water subcategory is …

NR 283.21 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. (1) Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall…

NR 283.22 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Based on EPA[s determination that BPT provides adequate control of toxic pollutants in cleaning process wastewater,…

NR 283.23 New source performance standards. (1) Any new source subject to this subchapter shall achieve performance standards calculated by multiplying the average process water usage flow rate for cleaning processes at a new source times the pollutant concentrations indicated in…

NR 283.24 Pretreatment standards for existing sources. Any existing source subject to this subchapter that introduces pollutants into a POTW shall comply with ch. NR 211. History: Cr. Register, October, 1987, No. 382, eff. 11-1-87.