FAA to ATR Planes: Swap That Shady Landing Gear Pronto!
Published Date: 2/28/2025
Rule
Summary
If you fly or work with ATR72 airplanes, listen up! The FAA found a problem with a key part in the landing gear that could break, so they’re making sure all affected parts get replaced by April 4, 2025. This keeps flights safe and stops broken parts from being used again—no surprise costs mentioned, just safer skies ahead!
Analyzed Economic Effects
4 provisions identified: 2 benefits, 2 costs, 0 mixed.
Replace ATR72 landing-gear hinge pins
If you operate ATR72 airplanes, the FAA requires replacing affected main landing gear (MLG) rear hinge pins, part number (P/N) D61000, and prohibits installing affected parts. The replacement and the installation prohibition must be done in accordance with European Union Aviation Safety Agency (EASA) AD 2024-0124 and the FAA AD, which is effective April 4, 2025.
Estimated compliance cost and fleet affected
The FAA estimates this AD affects 41 U.S.-registered ATR72 airplanes. The AD estimates per-airplane cost up to $15,620 (labor: up to 8 work-hours × $85/hour = $680; parts: up to $14,940) and total cost on U.S. operators up to $640,420.
Reduces risk of landing-gear collapse
The FAA issued this AD to address reports of ruptured MLG rear hinge pins that could lead to structural failure and collapse of the main landing gear, possibly causing airplane damage and injury to occupants. The AD applies to ATR--GIE Avions de Transport R[eacute]gional Model ATR72-101, -102, -201, -202, -211, -212, and -212A airplanes and is effective April 4, 2025.
Manufacturer may cover some replacement costs
The FAA notes that, according to the manufacturer, some or all of the costs of complying with this AD may be covered under warranty, which could reduce the cost impact on affected operators.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2025-03205, Air Plan Approval; New Jersey; Permits and Certificates for Minor Facilities (and Major Facilities Without an Operating Permit), and Air Emission Control and Permitting Exemptions
The EPA is giving a thumbs-up to New Jersey’s updated rules for permits and certificates that cover small and some big air pollution sources. These changes make sure new and changed facilities follow clean air standards, helping keep New Jersey’s air fresh and safe. The new rules kick in on March 31, 2025, making it easier for businesses to understand and follow air quality laws without extra costs.
Next: 2025-03293, Airworthiness Directives; Airbus SAS Airplanes
If you fly or work with Airbus A330-841 and -941 planes, listen up! The FAA is tightening safety rules by making you replace certain high-pressure valve clips more often and update flight manuals sooner. These changes start April 4, 2025, to keep everyone safer without breaking the bank.